Jan 20,2023
You can not use every regular screw in wood if you want your furniture to avoid any damage. We all know how expensive furniture is, and no one wants to face costly damage by using the wrong tools and fasteners. That is why there are different types of metal inserts that you can use according to your need. Likewise, we are going to share some guidelines about installing them in wood without damaging it. Moreover, you will need a brass inserts seller for it. The quality and standard matter a lot in it because they will stay inside the wood. You do not want them to have any corrosion or damage with time. That’s why top-grade quality is important. Once you buy them, you can get to the next phase, which is about installing them.
It is not a hard and fast rule, but it requires discipline to install brass inserts in wood. Many carpenters easily do that, and we assume that it is like a piece of cake. However, it needs some basic understanding of how to drill precisely without damaging the wood. Furthermore, you need some tools and accessories to complete this task. You will need a drill machine, epoxy/super glue, measuring tape, brass inserts, protective gloves, and protective goggles. Now, you can move on to start this task.
First of all, you need to measure the area where you are supposed to drill. Now, drill as per the required areas of the table. Make sure you don’t use a larger bid of drill than the size of the brass insert. Your drilling bid’s diameter must be slightly smaller than the insert. Start drilling every marked spot where you want to install inserts.
After you complete the drilling, it is time to blow air into the holes. It will remove wooden dust from the holes, so the inserts can get a better grip on the holes.
Now, it is time to install brass inserts in the holes. You can use either a drill machine to drive them inside the holes or you can hammer it. Both options are useful, and you may try whichever suits you. It also depends upon the type of wood. You will know about it in the softwood vs hardwood section later.
If you think that the inserts may loosen with time, you can add epoxy or super glue between holes and inserts. Before installing inserts in the holes, you can add some drops of glue or epoxy in the hole and then place the insert in it. This one is just for permanent installation because you won’t be able to remove it later. However, if you install it without any adhesive, it can be driven out whenever you want.
Some people drill and install screws directly in the wood. While some do not even use drills and drive the screw inside the wood to connect two parts. However, it can damage the wood as well, as it will loosen with time. Moisture or shocks can weaken the screw inside the wood, which can cause problems later. In addition, the brass insert allows users to remove parts again whenever they need. All they need is a screwdriver or drill machine to reverse the process of taking out the inserts. Another thing is the grip they provide to the screw inside the wood is much more powerful. Brass inserts can survive consistent shocks and movement without losing their grip.
If you are looking to find out some common uses of brass inserts in wood, you may explore it in the carpentry field. Lots of carpenters know how and where to use them for concise control. They can install them with precise calculations without any chance of error.
The tables on which we study, dine, and work, these brass inserts have a key role in holding them together. Without using them, it is not easy to hold table legs under the tabletop. Lots of pressure is applied on the table legs, and these inserts bear the pressure. If they are not used in them, tables will get imbalanced after some time. Inserts hold metal legs and wooden tops firmly if you install them properly.
Wooden enclosures rely on metal inserts to provide a better grip. Carpenters join multiple pieces together with inserts for a clean fixture. Electric boards, jewelry boxes, and decorative boxes need brass inserts to have smooth attachments without any drop in quality.
Furniture like beds, drawers, desks, and cupboards need inserts for firmness. Every carpenter knows where to use them because they are used on specific spots as per their functions. Of course, you can not use them everywhere. Also, for gardening tools and other wooden items, you can install brass inserts.
Installing brass inserts is easier in softwood than hardwood. The reason is the nature of these woods because they are two major types you can find in the trees. It depends on the type of seed and its tree, which makes it either a softwood tree or a hardwood tree. If you are installing inserts in softwood, you can just hammer it or push it with something without much effort. However, it requires a drill machine or a screwdriver to install a brass insert in it. Hardwood is also expensive and requires expertise and care. Carpenters use special tools to install inserts in them without damaging the wood.
If you are a trader and need to fulfill the mega demands of your customers, you need a consistent and bulk supply of brass inserts. This will also help you get low rates and prime quality.
